25mm Single Lever Shut-Off Ceramic Cartridge
GN-25G-F, GN-25P-F
25mm Single Lever Shut-Off Ceramic Cartridge
GN-25G-F and GN-25P-F are shut-off ceramic cartridge in 25mm diameter. Small-sized diameter in 25mm benefits the designer and engineer to include this shut-off 25mm cartridge into kitchen faucets and small-sized shower valves. Square Handle allows standard 9mm square handle to install and fix the handle tightly with only one screw. GN-25G-F and GN-25P-F provides M4 thread on the top side of handle for tighting the handle in two difference direction to make sure no loose situation will happen during use.
Small Dimensions Design Fits Anywhere of Your Shower Valve and Faucets
GN-25G-F and GN-25P-F 25mm single-lever shut-off ceramic cartridge was only 25mm for its diameter, and this 25mm cartridge is perfect choice for the engineers want to shrink the valves and faucets size down. Although the cartridge was in small size, it doesn’t influence the necessary strength, flow rate, and operating torque for it has to be. Geann 25mm shut-off cartridge could stand 8 N-M operating torque in strength to comply with WaterMark Requirements. And Our 25mm shut-off cartridge provides nearly 6 GPM at 45 psi and is sufficient for Kitchen and Lavatory applications.Interchangeable with current standard sizes of cartridge
Under consideration of the large cost of tooling development, GN-25P-F and GN-25G-F 25mm shut-off cartridges no need to modify the tooling for the current shower valve and faucet body. As long as the shower valve and faucet body are equipped with a 25mm cartridge, in standard flat base or in distributor tall high base, there is no modification or additional process needed to fit the valve body for installing Geann 25mm cartridge. It saves the timing and the cost of production and rapid the schedule for market extension.Available Type
Flow Rate
Specification
Technical Characteristics of The Cartridge:
Opening Angle: 25°
Max. Temperature: 90°C (194°F)
Min. Temperature: 3.9°C (39°F)
Recommended Temp.: 3.9°C ~ 85°C (39°F ~ 180°F)
Nut lock torque: 7 ~ 8 N.m
Flow Rate: Water Pressure 13.6 L/min(1bar); 18.9 L/min(2bar); 22.9 L/min(3bar)
Test Condition: Faucet without resistance
With Noise Reducer, flow rate reduces circa 6%.
Sealing Test
Pressure Resistance (Max.): Air Pressure 100PSI; Water Pressure 500PSI
Smooth Rotating Resistance: approximatly at 0.2 ~ 0.3N.m under 45 psi / 3 bar static water pressure
Endurance Test
ASME A112.18.1 600,000 cycles.
Also meets EN817 & EN200 standard.
Product Instruction Manual
GN-25G-F Valve Body Machining Detail
It will be the same as Distributor high tall base 25mm cartridge.The Order Process and Lead Time
Send inquiry to Geann, we'll answer you within 1 day.
We provide free samples as you required
Once the order confirm and payment received, prodution lead time is less than 30 days.
- Photo Gallery
- Geann Single Level Cartridge
- Geann Cartridge Product Line
- 25mm Single Lever / Mixer Ceramic Cartridge with Distributor
- 25mm Single Lever / Mixer Ceramic Cartridge with Distributor
- 25mm Single Lever / Mixer Ceramic Cartridge with Distributor
- Files Download
Single Lever or Mixer Ceramic Cartridge
The catalog includes dimension of the cartridges widely used in the world.
Press Release
- All Cartridges Complied to California AB100 Law
Geann Cartridges and Valves are all complied to California AB100 Law. Our products are certified by both NSF International and IAPMO.
Read More - 1/2 Half inch Faucet Plastic Cartridge
1/2 Half inch Two Handle Faucet Plastic Ceramic Cartridge for Faucet, Basin Application.
Read More - Pressure Balance Valve With Diverter
Pressure Balance Valve With Diverter for Anti-Scald and Shower Application.
Read More